Project sheet metal, CNC-sheet metal forming
Here you can see already realized customer projects.
Dual monitoring system 21.5 "
- Art. No. GHSDM21,5-S.S01
- version: recessed mounting
- Dimensions: 1240 x 760 x 102 / 77mm
- front made of 1.4301 grad stainless stell, brushed horizontally
- included: USB panel and WLAN module
- included: glass panel with black backprint, mounted front-flush
- included: 2x 21,5" monitor units 16:9
- resolution 1920x1080
- included: TASTATUR WALLY7/MP/UB/D
- included: Medical calculator module according to EN 60601-1 for patient environment
Enclosure GHUnimat120
- made of steel sheet
- 400 x 267 x 120 mm (15.74 x 10.51 x 4.72 inch)
- punched, bet and welded
- incl. partition wall and and baseplate perforated
- lacquered RAL 5002 and white printed
Art. No.: GHS74572.001
- front panel made of stainless steel 1.4301 (V2A)
- with integrated multitouch 1,5"
Art. No.: GHR21,5VA.001
- enclosure for 21,5"-display
- made of stainless steel EN1.4301
- polished 240er grit
- delivery incl. anti-reflective pane of float glass, 1-colour backprinted
- mounted at the front without gaps and joint mounted for hygienic challenging enviroment
- degree of protection IP66 (all sides possible)
Enclosure in all dimensions scalable freely.
Art. No.: GH181118.001
enclosure:
- edited customized
- 2-teilige Stanz-Biege-Kombi
- powder coated RAL5012 plain
- incl. sticker / foil
- delivery is unmounted
side panel and top cover:
- punched, nibbled, canted, welded and polished coners
- incl. drilling / cuts / breakthroughs
- incl. earth bolt M4x10, welded
Art. No.: GH43772.0006
enclosure:
- complete mounted
- 498 x 100 x 459,42 x 2mm (19.6 x 3.93 x 18.08 x 0.07 inch)
- surface: all sides powder-coated RAL5010 or RAL 7035
korpus:
- made of zincor sheet, punched, folded, welded
- incl. break throughs / holes
- incl. 2x telescopic rails for drawers feature
- incl. 1x drawer system
drawer:
- made of zincor sheet, punched, folded, welded
- incl. break throughs / holes (locks)
- incl. bump stop
- incl. plastic-handels GR1905rd/50/003
- incl. locking, lockable
Art. No.: GH180055.002a
Enclosure for printer
- W560 x D386 x H203 x s=2,5mm/
W22.04 x D15.19 x H7.99 x s=0.09 inch - made of aluminum AlMg3
- RAL9010 fine structure
- bolt point not visible
- consisting of: cover, base part, panels, slot bracket
- delivered mounted, incl. 2 handles and rubber feets
Side plate for profile enclosures
Side plate for profile enclosures
- made of aluminum
- incl. breakthroughs and depressions
- yellow chromated and selectively black powder coated
- Special feature: cut edges chromated
Artwork
Artwork
- made with the assistance
of our "machining" gefertigt - 24 carat gold plated
- registered design
by Markus Krauth, Höfen
www.bioenergetische-produkte.com
Art. No.: GH75100.0001
Enclosure made of stainless steel
- H750 x B580 x T250 mm/
H29.5 x W22.8 x D9.8 inch - made of stainless steel EN1.4301
- without optional mounting plate
- degree of protection IP68
- Z-bracket inside the enclosure
Art. No.: GH28137.0007
Stainless steel enclosure
- top:
181 x 128 x 22 x 1,5 mm/
7.12 x 5.03 x 0.86 x 0.05 inch - lower part:
178 x 127 x 18 x 1,5 mm
7.00 x 4.99 x 0.70 x 0.05 inch - 2-piece made of stainless steel 1.4301
- edited customized
- incl. 4 pressfit bolt for mounting board
Art. No.: GH02KS103/080MP01
- mounting plate for GH02KS103/080
- customized produced
- made of aluminum
- incl. 4 insert nuts M6
Enclosure made of stainless steel V2A
- for 32” monitor
IP-test chamber
- for dust testing according to
DIN 40 050/ IEC 529/ VDE 0470/ EN 60529 - incl. delivery plate and inspection glass
Custom stamping/bending part
Custom stamping/bending part
- made of galvanized sheet steel
- folded up and riveted plates
Art. No.: GHZW0002-b
Battery case
- battery housing made of stainless steel 1.4301
- cut, bent and welded
- incl. inserts
Art. No.: WH-ExpmousCLK
Holder for radio module WH-ExpmousCLK
- made of stainless steel
- punched and bent
- surface: glass bead blasted
Stainless steel keyboard enclosure
- punching/bent component made of stainless steel
- welded edges
- incl. insert thread bolts for the mounting of
printed circuit board
Stainless steel mounting plate
- incl. a frame welded on the rear side of the mounting plate
- mounting possibility by means of thread bolts welded onto the rear side
- incl. special pressed-in swivel part
- mounting plate made of stainless steel 1.4301
19 inch enclosure complete
enclosure:
- made of stainless steel 1.4301
- dimensions: 526 x 445 x 88.5 mm
- canted and welded
- incl. thread nuts
front panel:
- made of aluminum
- 484 x 88 x 4.0 mm
- incl. apertures
- incl. counterbores/millings
Art. No.: 80805106-00a
Keyboard tray
- bottom part made of zincor sheet
1,5 mm 400 x 150 x 35 mm - angle made of zincor sheet 1 mm
400 x 15 x 101,0 mm - parts spot-welded
- all sides ESD-coated in RAL 7035
light grey (highly resistive conductive)
Governor enclosure
- 384 x 247 x 134,7 mm
- made of zinc-coated steel panel s=1,5 mm
- incl. aperture
- incl. 3 x mounting plate, cranked
- incl. insert bolts
- incl. counter bore, incl. thread
- nibbled and edged
- edges riveted, not welded
19 inch enclosure
- made of aluminum 3 mm
- 405mm broad und 120mm high
- anodised nature
- edit custom
Tubular for scanner
- made of steinless steel 1 mm
- punched
- 4 x edged, tacked and grinded
- incl. 1 insert thread bolt
- all sides powder coated in RAL 9005 matt finished fine structure,
thread bolts without varnish
Angular sheet for interfaces
- made of aluminum
- punched and bent
- electrically conductive chromated
Carrier plate for foil keyboard
- stamped and milled
- electrically conductive and chromated
Punching/Bending part
- made of steel sheet
- incl. thread
- all sides powder coated in RAL 5018
Wall-mounting made of stainless steel
- wall-mounting made of stainless steel 1.4301, 2 mm thick
- exterior dimensions: B120 x H180 x D38 mm
- punched and bent
- fixing for VESA 100
Art. No.: GH1579.0001
Enclosure made of steinless steel
- 1,5 mm thick
- punched, bent, welded and grinded
- surface decoratively polished (240-er grain)
Wandgehäuse Form 2 mit PRIOline-Profilen
- made of aluminum
- with PRIOline-profiles
- 1 x cover
- transparent chromate coating
Input unit for visualisation
Input unit for visualisation in public domain
- dash of ground stainless steel
More information you can find here ->
Open Frame Module
WOF - Wöhr@ Open Frame module made of aluminium, zinc coated steel sheet or stainless steel. Bolts, cable outlets, screwings, openings for ventilation etc. and the mounting of electronic parts are adapted to the customized configurations.
For further models ans information, please have a look on:
Enclosure for amplifier
Customized enclosure for amplifier
- made of aluminum
- punched, bent, welded
- with clinch fasteners
- painted and printed
- with soft-touch paint
- brushed faceplate,
natural anodized and printed - designed for well-known guitarists,
who attach importance not only to
a good sound but also to an
attractive appearance
More information you can find here ->
Protection enclosure made of stainless steel
- 400 x 400 x 200 mm
- protection grade IP68
- resistant against sea water
- incl. mechanical treatment:
- incl. mounting plate made of stainless steel
- incl. mounted transparent window